samfurori

Wannan tsarin kusanci yana ba da damar auna ma'auni na dangi ƙaura na abubuwan injin motsi. Yana da dacewa musamman don auna ma'auni na dangi da kuma matsayi na axial na jujjuyawar injin injin, kamar waɗanda aka samo a cikin tururi, gas da turbines, da kuma a cikin masu canzawa, turbo-compressors da famfo. Tsarin ya dogara ne a kusa da TQ 402 ko TQ 412 transducer mara lamba da kuma kwandishan siginar IQS 450. Tare, waɗannan suna samar da tsarin kusancin daidaitacce wanda kowane sashi yana musanya. Tsarin yana fitar da wutar lantarki ko halin yanzu daidai da nisa tsakanin tip mai juyawa da manufa (misali mashin injin). Bangaren da ke aiki da transducer shine murɗa na waya wanda aka ƙera a cikin ƙarshen na'urar, wanda aka yi da Torlon (polyamide-imide). Jikin transducer an yi shi da bakin karfe. Abubuwan da ake nufi dole ne, a kowane hali, su zama ƙarfe. Jikin transducer yana samuwa tare da ma'auni ko zaren Ingilishi. Sigar TQ 412 an yi niyya ne don aikace-aikacen juyawa. TQ 402/412 yana da kebul na coaxial na haɗin gwiwa, wanda aka ƙare tare da mai haɗa nau'in AMP. Za'a iya yin oda daban-daban tsayin kebul (haɗin kai da tsawo). IQS 450 kwandishan siginar ya ƙunshi HF modulator/demodulator wanda ke ba da siginar tuƙi ga mai fassara. Wannan yana haifar da mahimmancin filin lantarki da ake amfani da shi don auna ratar. Na'urar kwandishana an yi ta da abubuwa masu inganci kuma an ɗora su a cikin extrusion na aluminum. Ana iya daidaita mai transducer TQ 402/412 tare da kebul na tsawo na EA 402 guda ɗaya. Akwatunan haɗin kai na zaɓi da gidaje suna ba da kariya ta injina na haɗin haɗin kebul da haɓakawa. Ana amfani da tsarin kusanci ta hanyar kayan aikin sarrafawa masu alaƙa ko wadatar wutar lantarki.

IQS 450 siginar kwandishan

HALAYEN FITARWA

Fitowar wutar lantarki, saitin waya 3

• Voltage a min. GAP: -1.6 V • Ƙarfin wutar lantarki a max. Saukewa: 17.6V

Matsakaicin kewayon: 16 V • Matsalolin fitarwa: 500 Ω

• Short-circuit halin yanzu: 45 mA fitarwa na yanzu, saitin waya 2

• Yanzu a min. GAP: 15.5mA

• Yanzu a max. GAP: 20.5mA

Matsakaicin iyaka: 5 mA

Ƙarfin fitarwa: 1 nF

Fitar da fitarwa: 100 μH

SUPPLY Ƙarfin wutar lantarki, daidaitawar waya 3

Wutar lantarki: -20V zuwa -32V *

• Yanzu: 13 ± 1 mA (25 mA max.) Fitowa na yanzu, 2-waya sanyi.

Wutar lantarki: -20V zuwa -32V *

• A halin yanzu: 15.5 zuwa 20.5 mA

Ƙarfin shigar da kayan aiki: 1 nF

Inductance shigar da kayan aiki: 100 μH

HALAYEN MAHALI

Yanayin zafin jiki

• Aiki: -30°C zuwa +85°C *

• Adana: -40°C zuwa +85°C Humidity

Aiki da ajiya: Max. Kashi 95% na Vibration ba mai ɗaukar nauyi ba

• Aiki da ajiya: 2 g kololuwa tsakanin 10 Hz da 500 Hz

Matsayin kariya: IP40

HALAYEN JIKI

Gina kayan: allura molded aluminum

HANYAR LANTARKI

Shigarwa: Bakin karfe coaxial mata soket

Fitarwa da ƙarfi: Screw terminal tsiri